English
ArabicLIGHTHERM-Drymix250
Loaded on a 40ft lorry to be sent to project site in Singapore
Inside LIGHTHERM Drymix per bag consist of a blend of LIGHTHERM Aggregrate, Cement and Sand.
This allow LIGHTHERM Drymix to be prepared in a wide range of density, ranges from 250kg/m³ with limited strength of 1 Mpa, to 1800kg/m³ of 30 Mpa.
LIGHTHERM- Drymix250
Usually used for it’s lightweight or it’s insulation capability
SINGAPORE PROJECT, STATECOURT
Architect specified our product due to it’s lightweight feature. It is merely just 10% of conventional concrete weight.
3000m³ of Lightweight Concrete
Used on site at a thickness of 100mm to 300mm
SINGAPORE PROJECT 2 : BIORAD LABORATORY
Objective: Thermal Insulation and Anti-Condensation
Application
50mm thick of LIGHTHERM DRYMIX 250kg/m³ was applied onto the slab to act as thermal screed to prevent condensation at soffit level below.
Application
50mm thick of LIGHTHERM DRYMIX 250kg/m³ was applied onto the slab to act as thermal screed to prevent condensation at soffit level below.
Thermal Calculation
Simulation was done to ensure no condensation issue and it achieved a U-Value of 0.96. LIGHTHERM 250 has a low thermal conductivity of 0.067W/MK which contributes in insulating the current level.
Download Center
Browse and download product brochures, test reports, and installation guides.
LIGHTHERM General Info
LIGHTHERM Certifications and Test Reports
- LIGHTHERM: Certificate of Conformity
- LIGHTHERM: SGBC (Singapore Green Build Council) Certificate
- LIGHTHERM: Toxicity Report (BS 6853L:1999 Annex B)
- LIGHTHERM: Non Combustible Test for Materials (BS 476: Part 4: 1970)
- LIGHTHERM: Classification of Reaction to Fire(EN 13501-1:2007 +A1:2009)
- LIGHTHERM: BS EN ISO 1182:2010 “Non-Combustibility Test”
- LIGHTHERM: BS EN ISO 1716:2010 “Determination of the Gross Heat of Combustion”
- LIGHTHERM: BS EN 45545-2:2013 +A1:2015 Annex C , Method 1 (Smoke Chamber)