High Insulation Panels for Bird Nest Houses | vPanel

High Quality Low-Cost Lightweight Concrete Insulation Panels for Bird Nests and Swiftlet Houses
Control Peak Temperatures with the Lowest Prices Guaranteed ($10 USD per m2)

Lightweight Precast Panels (ALC Panels) for Bird Nests and Swiftlet Houses

vPanel is an aerated autoclaved concrete panel (ALC Panel) – an ultra lightweight precast panel – made by Vodapruf Pte Ltd. vPanel uses a combination of fibre cement board and Lightherm Aggregates.

Ranging from only 35.8kg/m2 to 47kg/m2, vPanel has very high thermal and sound insulation due to the presence of Lightherm Aggregates, making it ideal for insulating bird nests and swiftlet houses – keeping them perfectly cool during peak day temperature – since high temperatures are detrimental to successful bird nests.

With the easy installation of vPanel(ALC Panel), it is both labor and cost saving. The finishing of vPanel is of high quality standard and does not require the need for skim coating. vPanel, commonly known as ALC Panel has also acquired certification such as non combustibility test, toxicity test, fire classification, fire rating and robustness test.

All tests are proudly supported by BCA’s Innovation Grant (iGrant).

ALC Panel and Precast wall Panels Supplier

vPanel – PDF Brochure

Project References - vPanel - ALC Panels

Observe some of our projects that used our Aerated Autoclaved Lightweight Concrete Panels (ALC Panels) –  vPanel. See more of our projects with other lightweight construction materials as well.

ALC Panels Supplier

PDF – ALC Panel w/ Joint Treatment
Project Ref. 1

Lightweight Precast Panels Supplier

PDF – ALC Panel Installation
Project Ref. 2

ALC Lightweight Wall Panels Supplier

PDF – Projects List
Updated May 2018

vNail - Bond Adhesive for vPanel

PDF – Wall System Application
Project Ref. 4


Ways of Application

vPanel mainly has two application method for erection of wall as a non-load bearing wall structure. One as an internal wall and the other being external.

ALC Panel

Internal Wall: vPanel is ideally used for internal partition wall due to its ultra lightweight properties, high thermal and sound insulation.

Lighweight Wall Panel, ALC Panel

External Wall: vPanel can also be used as external wall panel for modular houses, low-cost building, factories, hotel, apartment and villas etc.

Preparation (Based on one of the installation method, refer to our video)

This preparation video is based on one of vPanel’s (L-Bracket and Rebar) method for installation.


Other than the three key features of vPanel which are ultra lightweight properties, high thermal insulation and high acoustic insulation, It has other as important characteristics as well. They are high compressive strength, moisture-proof, fire-resistant and heat insulation (thermal efficiency).

vPanel Cut Out New Marking Words

An image detail on the different layers in a vPanel

The key unique selling point (USP):

  • Well-opened groove TOP and bottom
  • Cut-To-Size (No wastage)
  • Waterproof treatment to prevent cracks between joints and seepage
  • Manufactured in Malaysia, thus shorter lead time
  • Ultra lightweight, thus high productivity, less intensive labour
  • Different thickness 50mm-200mm
  • Lightest panel in the industry with a density of only 750kg/m3


vPanel has a wide range of thickness that caters to different specification and technical requirements, from 75mm thick to 200mm thick. The most commonly lightweight precast wall panel used are 75mm thick and 100mm thick. Below is a comparison table between the two most common thickness used in the construction industry. Vodapruf is working towards a new development in 25mm thick, 50mm thick and 250mm thick in the near future with test reports in the midst of developing and finalizing.

Technical Specification vPanel 75mm thick vPanel 100mm thick (Common Demand)
Per m2 weight (kg) 35.8kg 47kg
Thickness (mm) 75mm 100mm


Panel width (mm) 600mm 600mm
Standard Panel Length (mm) 2400mm 2400mm


Sound Transmission STC, ISO 140-3:1995 STC 35 STC 38
Thermal Conductivity (W/mK) 0.125 W/mK 0.125 W/mK
Water Penetration (BS 5234 Part 2) No evidence of water penetration No evidence of water penetration
Strength & Robustness (BS 5234 Part 2) Pass Pass
Fire rating (BS 476, Part 22:1987) 3 Hours 4 Hours

Want to know more about our Lightweight Construction Materials?

Contact our sales representatives for information on how we can help you.



vPanel Brochure